RB411R

The RB411R is a small CPE type RouterBOARD wireless router with an integrated 2.4GHz wireless card.

The RB411R has a very low power consumption rating - only 5.6W, ideal for solar panel installations.

The perfect simple CPE - no extra ports, no unused features - just the things you need. Attach an antenna, plug in your PoE powered ethernet, and connect to a remote AP.

RouterBOARD 411 with Atheros 300Mhz CPU, 32MB RAM, one LAN, integrated 2.4Ghz wireless, NAND Storage with RouterOS Level 3 (CPE support), no miniPCI, no serial port

Product specifications

Details
Product codeRB411R
CPU nominal frequency300 MHz
ArchitectureMIPS-BE
Size of RAM32 MB
10/100 Ethernet ports1
MiniPCI slots0
Wireless chip model1
Wireless standards802.11 b/g
Number of USB ports0
Memory Cards0
Power Jacknone present
802.3af supportNo
PoE in10-28V
Voltage MonitorNo
Operating temperature range-30C to +60C
License levelLevel3

Performance test results

RB411R (300Mhz) One 100M port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none 97.3 63.8 23.5 99.6 8.1 99.8
Bridging 25 bridge filter rules 41.0 26.9 23.5 99.6 8.1 99.8
Routing none 79.4 52.1 23.5 99.6 8.1 99.8
Routing 25 simple queues 67.8 44.5 23.5 99.6 8.1 99.8
Routing 25 ip filter rules 24.7 16.2 23.5 99.6 8.1 99.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results