RB411U

The RB411U is a versatile yet very small device. It includes all - a miniPCI slot, a USB 2.0 port and a miniPCI-E slot for connecting a 3G card. A SIM card slot for 3G is also present on the RB411U.

RB411U includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a mobile 3G router, and more - all at the same time.

You can use the USB port to attach a secondary storage device, or a USB 3G modem. The RB411U mounting holes are in the same location as other RB411 models, so you can easily mount it into any supported outdoor case/antenna.

Product specifications

Details
Product code	RB411U
CPU speed	300MHz
RAM	32MB
Architecture	MIPS-BE
LAN ports	1
MiniPCI	1
miniPCI-e	1
Integrated Wireless	0
USB	1
Memory Cards	0
Power Jack	10-28V
802.3af support	No
PoE	10-28V
Voltage Monitor	Yes
CPU temperature monitor	No
PCB temperature monitor	No
Temperature range	-35C to +70C
RouterOS License	Level4
Current Monitor	No
Max Power consumption	10W

RB411 Series @300Mhz (Ethernet only test)			64 byte frames		512 byte frames		1518 byte frames
IP Firewall	Conntrack	Mode	Mbps	Fps	Mbps	Fps	Mbps	Fps
off	off	Bridging	43.26	84500	99.53	24300	99.95	8230
on	off	Routing	28.26	55200	99.53	24300	99.95	8230
on	off	Bridging	25.19	49200	99.53	24300	99.95	8230
on	on	Routing	21.81	42600	99.53	24300	99.95	8230
on	on	Bridging	18.48	36100	99.53	24300	99.95	8230

All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.
Test results show device maximum performance, and are reached using optimal hardware and software configuration, different configurations most likely will result in lower results.