The RB433GL has three miniPCI slots, three Gigabit Ethernet ports and one USB port for storage or a 3G modem.
Three Gigabit Ethernet ports and three miniPCI slots gives you plenty of options- it can be high speed Gigabit Router, sector AP, wireless backhaul, firewall etc. Powerful Atheros 680MHz CPU, 128MB of RAM and Level5 RouterOS license provides required horsepower.
Differences between RB433GL and RB433AH can be seen in the file (RB411L differences) in the left hand menu.
|CPU nominal frequency||680 MHz|
|CPU core count||1|
|Size of RAM||128 MB|
|10/100/1000 Ethernet ports||3|
|Number of USB ports||1|
|Supported input voltage||8 V - 28 V|
|Dimensions||105 mm x 154 mm,|
|Operating temperature range||-40°C .. +70°C tested|
|USB slot type||USB type A|
Performance test results
|RB433GL||AR7161 1G all port test|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||25 bridge filter rules||58.5||710.4||84.5||346.1||86.4||44.2|
|Routing||25 simple queues||55.2||670.3||117.7||482.1||137.0||70.1|
|Routing||25 ip filter rules||54.7||664.3||59.4||243.3||59.2||30.3|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results