The RB433L has three miniPCI slots and three Ethernet ports - it\'s low-cost version of popular RB433 model.
Use this device in an outdoor case for a sector AP installation, or for a wireless backhaul. Three ports give you plenty of configuration options for many wireless scenarios.
It’s powered by an Atheros 300MHz CPU and has 64MB of RAM and a Level4 RouterOS license.
|CPU nominal frequency||300MHz|
|Size of RAM||64MB|
|10/100 Ethernet ports||3|
|10/100/1000 Ethernet ports||No|
|PoE||8-28V DC on Ether1|
|CPU temperature monitor||No|
|PCB temperature monitor||No|
|Dimensions||105 mm x 154 mm|
Performance test results
|RB433L (300Mhz) ||100M port test ||RouterOS |
|Mode ||Configuration ||64 byte ||512 byte ||1518 byte |
|kpps ||Mbps ||kpps ||Mbps ||kpps ||Mbps |
|Bridging ||none ||97.3 ||63.8 ||47.0 ||199.3 ||16.2 ||199.1 |
|Bridging ||25 bridge filter rules ||41.0 ||26.9 ||40.6 ||172.1 ||16.2 ||199.1 |
|Routing ||none ||79.4 ||52.1 ||47.0 ||199.3 ||16.2 ||199.1 |
|Routing ||25 simple queues ||67.8 ||44.5 ||47.0 ||199.3 ||16.2 ||199.1 |
|Routing ||25 ip filter rules ||24.7 ||16.2 ||28.9 ||122.5 ||16.2 ||199.1 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results