The RB450 is a five port ethernet router with serial port and power jack for OEM applications.
The RB450 includes a switch chip, which means that it’s five ports can be combined to function as a switch increasing port to port communication speed.
The RB450 series are your perfect wired router for installations where wireless interfaces are not required.
|CPU nominal frequency||300 MHz|
|CPU core count||1|
|Size of RAM||64 MB|
|10/100 Ethernet ports||5|
|Supported input voltage||8 V - 28 V|
|Tested ambient temperature||-40°C .. +70°C tested|
|Storage size||128 MB|
Performance test results
|RB450||AR7130 100M all port test|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||25 bridge filter rules||16.2||196.7||40.6||166.3||41.0||21.0|
|Routing||25 simple queues||16.2||196.7||47.0||192.5||67.8||34.7|
|Routing||25 ip filter rules||16.2||196.7||28.9||118.4||24.7||12.6|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results