The RB711 is a small CPE type RouterBOARD wireless router with an integrated 2GHz 802.11b/g/n wireless card.
RB711 includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a CPE and more - all at the same time.
This device has one MMCX connector, allowing single chain connectivity. The integrated wireless card is capable of up to 27dBm transmit power output.
Built in 16kV ESD protection on RF port.
2Ghz band: 2192-2539Mhz
|CPU nominal frequency||400 MHz|
|CPU core count||1|
|Size of RAM||32 MB|
|10/100 Ethernet ports||1|
|10/100/1000 Ethernet ports||0|
|Wireless chip model||Yes|
|Number of USB ports||0|
|CPU temperature monitor||No|
|PCB temperature monitor||No|
|Operating temperature range||-30 .. +65C|
Performance test results
|RB711-2Hn (400Mhz) ||Gigabit port test ||RouterOS |
|Mode ||Configuration ||64 byte ||512 byte ||1518 byte |
|kpps ||Mbps ||kpps ||Mbps ||kpps ||Mbps |
|Bridging ||none (fast path) ||194.0 ||127.3 ||178.4 ||756.6 ||81.2 ||997.8 |
|Bridging ||25 bridge filter rules ||53.7 ||35.2 ||52.3 ||221.9 ||51.5 ||633.0 |
|Routing ||none (fast path) ||183.7 ||120.5 ||167.0 ||708.1 ||81.2 ||997.8 |
|Routing ||25 simple queues ||92.8 ||60.8 ||88.5 ||375.1 ||81.2 ||997.8 |
|Routing ||25 ip filter rules ||37.5 ||24.6 ||38.4 ||162.6 ||37.6 ||462.4 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results