The RB711-5Hn is a small CPE type RouterBOARD wireless router with an integrated 5GHz 802.11a/n wireless card.
RB711 includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a CPE and more - all at the same time.
RB711-5Hn is equiped with MMCX connector. The integrated wireless card is capable of up to 23dBm transmit power output.
|CPU nominal frequency||400 MHz|
|CPU core count||1|
|Size of RAM||32 MB|
|10/100 Ethernet ports||1|
|Wireless chip model||AR9280-AL1A|
|Operating temperature range||-30C to +60C|
|Number of chains||1|
Performance test results
|RB711-5Hn||AR7241 100M 1 port test|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||none (fast path)||8.1||98.6||23.5||96.3||148.0||75.8|
|Bridging||25 bridge filter rules||8.1||98.6||23.5||96.3||53.7||27.5|
|Routing||none (fast path)||8.1||98.6||23.5||96.3||148.0||75.8|
|Routing||25 simple queues||8.1||98.6||23.5||96.3||92.8||47.5|
|Routing||25 ip filter rules||8.1||98.6||23.5||96.3||37.5||19.2|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results