More info:

RB711G-5HnD

The RB711G-5HnD is a small CPE type RouterBOARD 5GHz wireless router with an integrated wireless card. It has two antenna connectors for using in dual chain setups, and a Gigabit Ethernet port - the perfect device for Nv2!

The integrated 5GHz 802.11a/n wireless card is capable of up to 25dBm! It has built in 16kV ESD protection on both the RF and Ethernet ports.

Supported frequency:
4800-6075Mhz

Product specifications

Details
Product codeRB711G-5HnD
Current MonitorNo
TX powerup to 25dBm
CPU speed400MHz
CPU Atheros AR7241
RAM32MB
LAN ports1
GigabitYes
MiniPCI0
Integrated Wireless1
Wireless standards802.11an
USB0
Power JackNo
PoE8-30V DC
Voltage MonitorNo
CPU temperature monitorNo
PCB temperature monitorNo
Dimensions10.5 cm x 10.5 cm
Operating SystemRouterOS
Temperature range-30 .. +65C
RouterOS LicenseLevel 3

Ethernet throughput

RB711G-5HnD @400Mhz64 byte frames512 byte frames1518 byte frames
IP FirewallConntrackModeMbpsFpsMbpsFpsMbpsFps
offoffBridging49.6697000370.2890400949.6678200
onoffRouting44.787300342.0283500939.9577400
onoffBridging30.7760106234.757300650.9253600
ononRouting32.7764000254.7762200704.3558000
ononBridging18.0235200141.7234600386.1831800
    Notes:
  1. All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
    Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
  2. Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.