hAP

This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas.

The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included.

hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.

Product specifications

Details
Product codeRB951Ui-2nD
CPU nominal frequency650 MHz
CPU core count1
Size of RAM64 MB
10/100 Ethernet ports5
Wireless standards802.11b/g/n
Wireless chip modelQCA9531
Number of USB ports1
Power Jack1
PoE inYes
Supported input voltage6 V - 30 V
PoE outYes
Dimensions113 x 89 x 28mm
Operating SystemRouterOS
Operating temperature range-30 + 70 C
License level4
Antenna gain DBI1.5
CPUQCA9531
Max Power consumption5W
USB slot typeUSB type A
Number of chains2
Storage typeFLASH
Storage size16 MB
Suggested price$45

Wireless specifications

2.4 GHz
TXRX
1MBit/s22-96
11MBit/s22-89
6MBit/s20-93
54MBit/s18-74
MCS020-93
MCS716-71

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Performance test results

RB951Ui-2nDQCA9531 (650Mhz) 100M all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)40.6493.0117.4480.9217.0111.1
Bridging25 bridge filter rules40.6493.070.1287.170.936.3
Routingnone (fast path)40.6493.0117.4480.9200.8102.8
Routing25 simple queues40.6493.079.6326.090.846.5
Routing25 ip filter rules40.6493.042.2172.843.222.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results