OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 5GHz 802.11a/n standard device.
Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 400mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.
LED signal indicators on it’s back are fully customisable, show Ethernet activity or wireless signal - or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive.
The OmniTIK UPA also features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices (like SXT-5HPnD) with the same voltage as applied to the unit. Less power adapters to worry about!
Box contains: OmniTik UPA-5HnD, mounting loops, PoE injector, 24v 2.5A power adapter
|CPU nominal frequency||400 MHz|
|CPU core count||1|
|Size of RAM||64 MB|
|10/100 Ethernet ports||5|
|Wireless chip model||AR9280|
|Number of USB ports||1|
|Supported input voltage||9 V - 30 V|
|PCB temperature monitor||Yes|
|Operating temperature range||-30 .. +70C|
|Antenna gain DBI||7.5|
|USB slot type||USB type A|
|Number of chains||2|
|Storage size||64 MB|
wireless parameters may be limited in software, depending on your local regulatory limitations
Performance test results
|RBOmniTikUPA-5HnD||AR7241 100M all port test|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||none (fast path)||40.3||489.4||117.0||479.2||194.0||99.3|
|Bridging||25 bridge filter rules||40.3||489.4||52.3||214.3||53.7||27.5|
|Routing||none (fast path)||40.3||489.4||117.0||479.2||183.7||94.1|
|Routing||25 simple queues||40.3||489.4||88.5||362.4||92.8||47.5|
|Routing||25 ip filter rules||37.6||457.0||38.4||157.1||37.5||19.2|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results