OmniTIK U-5HnD

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 802.11 standard device.

Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 400mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal - or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features

Box contains: OmniTik U-5HnD, mounting loops, PoE injector, power adapter

Product specifications

Product codeRBOmniTIKU-5HnD
CPU nominal frequency400 MHz
CPU core count1
Size of RAM32 MB
10/100 Ethernet ports5
10/100/1000 Ethernet ports0
MiniPCI slots0
MiniPCI-e slots0
Wireless chip modelAR9280-AL1A
Wireless standards802.11a/n
Number of USB ports1
Memory CardsNo
Power Jack0
802.3af supportNo
Supported input voltage9 V - 30 V
PoE inYes
PoE outNo
Voltage MonitorNo
PCB temperature monitorNo
CPU temperature monitorNo
Operating SystemRouterOS v5 and above
Operating temperature range-30 .. +70C
License level4
Antenna gain DBI7.5
Current MonitorNo
SFP ports0
SFP+ ports0
USB slot typeUSB type A
Number of chains2
Serial portNone
Suggested price$89.00

Wireless specifications

5 GHz

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Performance test results

RBOmniTIKU-5HnDAR7241 100M all port test
ModeConfiguration1518 byte512 byte64 byte
Bridgingnone (fast path)40.3489.4117.0479.2194.099.3
Bridging25 bridge filter rules40.3489.452.3214.353.727.5
Routingnone (fast path)40.3489.4117.0479.2183.794.1
Routing25 simple queues40.3489.488.5362.492.847.5
Routing25 ip filter rules37.6457.038.4157.137.519.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results