cAP 2n

RouterBOARD cAP-2n (ceiling Access Point) is our first 2.4GHz ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.

cAP-2n supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.

Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.

Product specifications

Details
Product codeRBcAP2n
CPU nominal frequency400 MHz
CPU core count1
Size of RAM64 MB
10/100 Ethernet ports1
Wireless standards802.11b/g/n
Wireless chip modelAR9331
Supported input voltage11 V - 57 V
Dimensions185mm diameter, 31mm heigh
Operating SystemRouterOS
Tested ambient temperature-30C to +70C
License level4
Antenna gain DBI2
CPUAR9331
Max Power consumption2W
Number of chains1
Storage typeFLASH
Storage size16 MB
Suggested price$49.95

Wireless specifications

2.4 GHz
TXRX
1MBit/s17-96
11MBit/s17-88
6MBit/s15-92
54MBit/s11-73
MCS015-92
MCS710-70

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Performance test results

RBcAP2nAR9331 100M 1 port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)8.198.423.596.3146.775.1
Bridging25 bridge filter rules8.198.423.596.349.625.4
Routingnone (fast path)8.198.423.596.3142.472.9
Routing25 simple queues8.198.423.596.380.341.1
Routing25 ip filter rules8.198.423.596.335.818.3
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results