Three miniPCI slots and three Ethernet ports give you enough connectivity options to use the RB433 as the central part of your network.

A wireless repeater plus a local access point, or an AP with multiple sectors - it’s all up to you, all of it is made possible by the RB433.

Product specifications

Product codeRB433
CPU nominal frequency300 MHz
CPU core count1
Size of RAM64 MB
10/100 Ethernet ports3
10/100/1000 Ethernet ports0
MiniPCI slots3
MiniPCI-e slots0
Number of USB ports0
Memory Cards0
Power Jack1
802.3af supportNo
PoE inYes
Supported input voltage10 V - 28 V
PoE outNo
Voltage MonitorNo
CPU temperature monitorNo
PCB temperature monitorNo
Operating temperature range-40°C .. +70°C tested
License level4
Antenna gain DBINo
Current MonitorNo
SFP ports0
SFP+ ports0
Number of chains0
Serial portRS232
Suggested price$99.00

Performance test results

RB433AR7130 100M all port test
ModeConfiguration1518 byte512 byte64 byte
Bridging25 bridge filter rules16.2196.740.6166.341.021.0
Routing25 simple queues16.2196.747.0192.567.834.7
Routing25 ip filter rules16.2196.728.9118.424.712.6
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results