RB433GL

The RB433GL has three miniPCI slots, three Gigabit Ethernet ports and one USB port for storage or a 3G modem.

Three Gigabit Ethernet ports and three miniPCI slots gives you plenty of options- it can be high speed Gigabit Router, sector AP, wireless backhaul, firewall etc. Powerful Atheros 680MHz CPU, 128MB of RAM and Level5 RouterOS license provides required horsepower.

Differences between RB433GL and RB433AH can be seen in the file "RB411L differences" in the left hand menu.

Product specifications

Details
Product code	RB433GL
CPU speed	680MHz
RAM	128MB
Architecture	AR7161
LAN ports	3
Gigabit	yes, all 3
MiniPCI	3
USB	1
Power Jack	Yes
802.3af support	No
PoE	8-28V DC on Ether1
Voltage Monitor	Yes
CPU temperature monitor	No
PCB temperature monitor	No
Dimensions	105 mm x 154 mm,
Operating System	RouterOS
Temperature range	-30C to +60C
RouterOS License	Level5
Current Monitor	No
CPU	680MHz

RB4xxG Series @680Mhz (Ethernet only test)			64 byte frames		512 byte frames		1518 byte frames
IP Firewall	Conntrack	Mode	Mbps	Fps	Mbps	Fps	Mbps	Fps
off	off	Bridging	76.9	150200	595.15	145300	1220.47	100500
on	off	Routing	52.38	102300	396.08	96700	1035.88	85300
on	off	Bridging	44.95	87800	353.08	86200	947.23	78000
on	on	Routing	39.68	77500	300.24	73300	823.36	67800
on	on	Bridging	29.9	58400	232.24	56700	660.63	54400

All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.
Test results show device maximum performance, and are reached using optimal hardware and software configuration, different configurations most likely will result in lower results.