RB411AR

The RB411AR has an integrated 802.11b/g wireless card with MMCX conenctor.

Not only you have a readymade wireless solution, but also you have a spare miniPCI card slot for your choice of another wireless card!

With this device you can connect to a remote AP and serve your local area with internet both at the same time!

It has the same familiar footprint as the other RB411 series devices, which means you can mount it into any supported outdoor enclosure, and upgrading to this model will take just minutes.

Product specifications

Details
Product code	RB411AR
CPU speed	300MHz
Architecture	MIPS-BE
RAM	64MB
LAN ports	1
MiniPCI	1
Integrated Wireless	1
Wireless standards	802.11 b/g
USB	0
Memory Cards	0
Power Jack	10-28V
802.3af support	No
PoE	10-28V
Voltage Monitor	Yes
PCB temperature monitor	No
CPU temperature monitor	No
Temperature range	-30C to +60C
RouterOS License	Level4
Current Monitor	No

RB411AR @300MHz (1 port test)			64 byte frames		512 byte frames		1518 byte frames
IP Firewall	Conntrack	Mode	Mbps	Fps	Mbps	Fps	Mbps	Fps
off	off	Bridging	43.26	84500	99.53	24300	99.95	8230
on	off	Routing	28.26	55200	99.53	24300	99.95	8230
on	off	Bridging	25.19	49200	99.53	24300	99.95	8230
on	on	Routing	21.81	42600	99.53	24300	99.95	8230
on	on	Bridging	18.48	36100	99.53	24300	99.95	8230

All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.
Test results show device maximum performance, and are reached using optimal hardware and software configuration, different configurations most likely will result in lower results.