CCR1072-1G-8S+

Our new flagship router, the CCR1072, is powered by a Tilera 72 core CPU, each core is clocked at 1GHz, and to fully utilise this power, the CCR1072 is equipped with eight independently connected 10G SFP+ ports.

The unit comes equipped with installed RouterOS L6, 16GB of built in ECC RAM, touchscreen color LCD, two removable (hotplug) power supplies for redundancy, smart card slot, microUSB, regular size USB, microSD and 2x M.2 slots for additional storage.

Thanks to the unique 72 core processor and ports that are directly connected to the CPU, CCR1072 is capable of over 120 million packets per second throughput.

Product specifications

Details
Product codeCCR1072-1G-8S+
CPU nominal frequency1 GHz
CPU core count72
ArchitectureTILE
Size of RAM16 GB
10/100/1000 Ethernet ports1
Number of USB ports2
Memory Cards3
Memory card typemicroSD, 2x M.2
Supported input voltage12 V - 12 V
Voltage MonitorYes
CPU temperature monitorYes
PCB temperature monitorYes
Dimensions443x315x44mm
Operating SystemRouterOS
Tested ambient temperature-20C .. +60C
License level6
Current MonitorYes
CPUTLR4-07280DG-10CE
Max Power consumption125W
SFP+ ports8
USB slot typeUSB type A
Serial portRJ45
Storage typeNAND
Storage size128 MB
Suggested price$3050

Included parts

Ethernet test results

CCR1072-1G-8S+Tile 72 Core (1200Mhz, DDR1333) Max possible throughput
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)6,502.078,960.318,790.076,963.8119,047.660,952.4
Bridging25 bridge filter rules6,130.574,448.88,192.733,557.310,339.55,293.8
Routingnone (fast path)6,502.078,960.318,790.076,963.886,507.044,291.6
Routing25 simple queues6,502.078,960.312,370.450,669.213,474.26,898.8
Routing25 ip filter rules4,667.656,683.35,985.124,515.05,873.83,007.4
CCR1072-1G-8S+Tile 72 Core (1200Mhz, DDR1600) Max possible throughput
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)6,502.078,960.318,790.076,963.8119,047.660,952.4
Bridging25 bridge filter rules6,502.078,960.39,099.237,270.310,432.35,341.3
Routingnone (fast path)6,502.078,960.318,790.076,963.894,668.448,470.2
Routing25 simple queues6,502.078,960.313,500.055,296.013,683.57,006.0
Routing25 ip filter rules5,247.663,726.96,125.525,090.06,104.03,125.2
CCR1072-1G-8S+Tile 72 Core (1000Mhz, DDR1333) Max possible throughput
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)6,502.078,960.318,790.076,963.898,801.050,586.1
Bridging25 bridge filter rules5,033.361,124.47,149.829,285.68,682.14,445.2
Routingnone (fast path)6,502.078,960.318,790.076,963.873,061.037,407.2
Routing25 simple queues6,502.078,960.310,980.344,975.311,368.25,820.5
Routing25 ip filter rules4,125.650,101.35,051.520,690.94,999.02,559.5
CCR1072-1G-8S+Tile 72 Core (1000Mhz, DDR1600) Max possible throughput
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)6,502.078,960.318,790.076,963.898,873.550,623.2
Bridging25 bridge filter rules5,764.870,007.78,240.233,751.98,866.34,539.5
Routingnone (fast path)6,502.078,960.318,790.076,963.876,201.039,014.9
Routing25 simple queues6,502.078,960.311,073.545,357.111,444.45,859.5
Routing25 ip filter rules4,664.756,648.15,200.321,300.45,321.02,724.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results