CRS212-1G-10S-1S+IN

Cloud Router Switch 212-1G-10S-1S+IN is new “small size low cost” member of our CRS series. It comes with one Gigabit Ethernet RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel and serial port (RJ45). Product includes indoor desktop case and power supply. Special ears are provided for mounting the unit in rack.

Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.

Product specifications

Details
Product codeCRS212-1G-10S-1S+IN
CPU nominal frequency400 MHz
CPU core count1
Size of RAM64 MB
10/100/1000 Ethernet ports1
Power Jack1
Supported input voltage8 V - 30 V
Voltage MonitorYes
PCB temperature monitorYes
Dimensions200x144x47mm
Operating SystemRouterOS
Tested ambient temperature-20C to +55C tested
License level5
Current MonitorYes
CPUQCA8519
Max Power consumption20W
SFP ports10
SFP+ ports1
Serial portRJ45
Storage typeFLASH
Storage size16 MB
Suggested price$219.00

Included parts

Switching results

CRS212-1G-10S-1S+IN
ModeConfiguration64 byte512 byte1518 byte
kppsMbpskppsMbpskppsMbps
SwitchingNon blocking Layer 2 throughput31,250.016,000.04,934.220,210.51,706.820,726.9
SwitchingNon blocking Layer 2 capacity31,250.032,000.04,934.240,421.11,706.841,453.8
SwitchingNon blocking Layer 1 throughput31,250.021,000.04,934.221,000.01,706.821,000.0
SwitchingNon blocking Layer 1 capacity31,250.042,000.04,934.242,000.01,706.842,000.0

Ethernet test results

CRS212-1G-10S-1S+INQCA8519 Max possible throughput test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)26.7324.228.6117.124.512.5
Bridging25 bridge filter rules21.4259.922.491.822.211.4
Routingnone (fast path)23.0279.323.596.324.512.5
Routing25 simple queues19.6238.022.491.821.010.8
Routing25 ip filter rules7.995.910.442.610.85.5
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results