RB2011iL-RM

The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.

The RB2011iL-RM includes a new feature - power injector on Ethernet port 10 - it can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports and five Fast Ethernet ports for unbeliveable USD 99!

RouterBOARD 2011iL-RM comes with 1U rackmount enclosure and power supply.

Product specifications

Details
Product codeRB2011iL-RM
CPU nominal frequency600 MHz
CPU core count1
Size of RAM64 MB
ArchitectureMIPS-BE
10/100 Ethernet ports5
10/100/1000 Ethernet ports5
Power Jack1
Supported input voltage8 V - 30 V
PoE outYes
PoE inYes
Tested ambient temperature-35C to +65C
License level4
CPUAR9344
Max Power consumption6W
Storage typeNAND
Storage size128 MB
Suggested price$99.00

Included parts

Ethernet test results

RB2011iL-RMAR9344 1G&100M all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)122.01,481.6232.0950.3269.6138.0
Bridging25 bridge filter rules83.61,015.286.0352.387.644.9
Routingnone (fast path)122.01,481.6210.0860.2226.9116.2
Routing25 simple queues100.51,220.5103.9425.6106.654.6
Routing25 ip filter rules56.8689.859.6244.160.531.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results