RB911G-2HPnD

The RB911G-2HPnD is a small wireless router with an integrated high power 2.4GHz wireless card. The Gigabit port helps to utilize the full potential of 802.11n wireless speeds.

The integrated wireless card is capable of up to 1000mW output power. It has built in 16kV ESD protection on both the Ethernet and the MMCX ports.

Product specifications

Details
Product codeRB911G-2HPnD
CPU nominal frequency600 MHz
CPU core count1
Size of RAM64 MB
ArchitectureMIPS-BE
10/100/1000 Ethernet ports1
Wireless standards802.11b/g/n
Wireless chip modelAR9342
Power Jack1
Supported input voltage6 V - 30 V
PoE inYes
Voltage MonitorYes
PCB temperature monitorYes
Dimensions105x105mm
Operating SystemRouterOS
Tested ambient temperature-40°C .. +70°C tested
License level3
CPUAR9342
Max Power consumption10W
Number of chains2
Storage typeNAND
Storage size128 MB
Suggested price$49.00

Ethernet test results

RB911G-2HPnDAR9342 1G 1 port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)81.0983.7232.0950.3269.6138.0
Bridging25 bridge filter rules81.0983.786.0352.387.644.9
Routingnone (fast path)81.0983.7210.0860.2226.9116.2
Routing25 simple queues81.0983.7103.9425.6106.654.6
Routing25 ip filter rules56.8689.859.6244.160.531.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results


Horizontal Azimuth





Horizontal Elevation