mANTBox 15s

The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB921 device, the mANTBox comes ready to use with everything included. The device uses a high speed 720MHz CPU and has a built in 802.11 ac/a/n wireless device with up to 31dBm output power.

mANTBox 15s comes with 15dBi 120 degree sector antenna

- RB921GS-5HPacD-15S-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- RB921GS-5HPacD-15S (International) supports 5150MHz-5875MHz range.

Product specifications

Details
Product codeRB921GS-5HPacD-15S
10/100/1000 Ethernet ports1
Antenna gain15
CPUQCA9557
CPU core count1
CPU nominal frequency720 MHz
Dimensions140 x 348 x 82 mm
License level4
Max Power consumption13W
Number of chains2
Operating SystemRouterOS
PCB temperature monitorYes
PoE inYes
Power Jack1
SFP ports1
Size of RAM128 MB
Storage size128 MB
Storage typeNAND
Supported input voltage9 V - 30 V
Tested ambient temperature-30 + 70 C
Voltage MonitorYes
Wireless chip modelQCA9882
Wireless standards802.11a/n/ac
Suggested price$139

Wireless specifications

5 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
6MBit/s31-961259
54MBit/s27-81501
MCS030-961000
MCS727-77501
MCS922-72158

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Ethernet test results

RB921GS-5HPacD-15SQCA9557 1G all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)81.2986.1234.9962.2477.7244.6
Bridging25 bridge filter rules81.2986.1118.4485.0119.561.2
Routingnone (fast path)81.2986.1234.9962.2408.2209.0
Routing25 simple queues81.2986.1158.3648.4165.884.9
Routing25 ip filter rules64.8786.970.4288.460.931.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results