DynaDish 5

The DynaDish 5 is a new 802.11ac outdoor device with an integrated 25dBi antenna. Compact in it’s design, it is a simple and completely integrated product with everything you need to quickly install a reliable point to point link.

The DynaDish 5 is powered by a new 720MHz CPU from Qualcomm.

- RBDynaDishG-5HacD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- RBDynaDishG-5HacD (International) supports 5150MHz-5875MHz range.

Product specifications

Details
Product codeRBDynaDishG-5HacD
CPU nominal frequency720 MHz
CPU core count1
Size of RAM128 MB
10/100/1000 Ethernet ports1
Wireless chip modelQCA9892
Wireless standards802.11a/n/ac
PoE in802.3af
Supported input voltage11 V - 60 V
Voltage MonitorYes
PCB temperature monitorYes
DimensionsØ 404mm, height 175mm (without mount)
Operating SystemRouterOS
Tested ambient temperature-40C to +70C
License level3
Antenna gain25
CPUQCA9557
Max Power consumption9W
Number of chains2
Storage typeFLASH
Storage size16 MB
Suggested price$179

Wireless specifications

5 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
6MBit/s31-961259
54MBit/s28-81631
MCS030-961000
MCS727-77501
MCS922-72158

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Ethernet test results

RBDynaDishG-5HacDQCA9557 1G all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)81.2986.1234.9962.2477.7244.6
Bridging25 bridge filter rules81.2986.1118.4485.0119.561.2
Routingnone (fast path)81.2986.1234.9962.2408.2209.0
Routing25 simple queues81.2986.1158.3648.4165.884.9
Routing25 ip filter rules64.8786.970.4288.460.931.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results