SXT Lite5 ac

The SXT Lite5 ac is a new low cost device in our 802.11ac product lineup.

Unit is equipped with powerful 650MHz CPU, 64MB RAM, 10/100Mbps Ethernet port and has 5GHz 16dBi 28 degree beamwidth antenna.

The SXT Lite5 ac supports 256-QAM modulation and 80MHz channels, so you get more speed per same frequency width as 802.11 devices. It also supports 802.11a/n, Nv2, Nstreme mode and is compatible with all legacy RouterBOARD devices. New industrial wireless chip QCA-9892 provides support for 5/10 MHz channel width for 802.11an standard.

We have two versions available - RBSXT5HacD2n (International) and RBSXT5HacD2n-US (USA). RBSXT5HacD2n-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. RBSXT5HacD2n (International) supports 2412-2484MHz and 5150MHz - 5875MHz range.

SXT install guide:

Product specifications

Details
Product codeRBSXT5HacD2n
10/100 Ethernet ports1
Antenna gain16
CPUQCA9531
CPU core count1
CPU nominal frequency650 MHz
Dimensions140x140x56mm
License level3
Max Power consumption8W
Number of chains2
Operating SystemRouterOS
PoE inYes
Secondary wireless chip modelQCA9531
Secondary wireless standards802.11b/g/n
Size of RAM64 MB
Storage size16 MB
Storage typeFLASH
Supported input voltage8 V - 30 V
Tested ambient temperature-30 + 70 C
Wireless chip modelQCA9892
Wireless standards802.11a/n/ac
Suggested price$65

Wireless specifications

5 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
6MBit/s29-96794
54MBit/s26-81398
MCS029-96794
MCS725-77316
MCS922-72158

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Ethernet test results

RBSXT5HacD2nQCA9531 100M one port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)8.198.423.596.3173.688.9
Bridging25 bridge filter rules8.198.423.596.370.936.3
Routingnone (fast path)8.198.423.596.3160.882.3
Routing25 simple queues8.198.423.596.390.846.5
Routing25 ip filter rules8.198.423.596.343.222.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results