SXT 6

SXT 6 is our first product for licensed 5.9-6.4GHz frequency. Equipped with RouterOS Level 4 license and 28 degree Dual Chain 16dBi antenna, unit can be used as Base Station or CPE, as well as two of them can be used to create Point-to-Point link.

IMPORTANT! Product is available for 5.9-6.4GHz license holders only, you would need to show your license to Distributor to be able to place your order. This product is NOT for unlicensed ISM bands!

Product specifications

Details
Product codeRBSXTG-6HPnD
CPU nominal frequency600 MHz
CPU core count1
Size of RAM64 MB
10/100/1000 Ethernet ports1
Wireless standards802.11a/n
Wireless chip modelAR9344
Number of USB ports1
PoE inYes
Supported input voltage7 V - 30 V
Voltage MonitorYes
PCB temperature monitorYes
Dimensions140x140x56mm
Operating SystemRouterOS
License level4
Antenna gain DBI16
CPUAR9344
Max Power consumption14W
USB Power ResetYes
USB slot typeUSB type A
Number of chains2
Storage typeFLASH
Storage size16 MB
Suggested price$99

Wireless specifications

6 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
6MBit/s30-931000
54MBit/s27-80501
MCS029-93794
MCS724-76251

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Ethernet test results

RBSXTG-6HPnDAR9344 1G 1 port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)81.0983.7232.0950.3269.6138.0
Bridging25 bridge filter rules81.0983.786.0352.387.644.9
Routingnone (fast path)81.0983.7210.0860.2226.9116.2
Routing25 simple queues81.0983.7103.9425.6106.654.6
Routing25 ip filter rules56.8689.859.6244.160.531.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results