mAP

The mAP (micro Access Point) is a tiny size wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack. It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.

Product specifications

Details
Product codeRBmAP2nD
10/100 Ethernet ports2
802.3af supportno
Antenna gain1.2
CPUQCA9531
CPU core count1
CPU nominal frequency650 MHz
Dimensions68x68x19mm
License level4
Max Power consumption5W
Number of USB ports1
Number of chains2
Operating SystemRouterOS
PCB temperature monitorYes
PoE in802.3af/at
PoE outYes
Power Jack1
Size of RAM64 MB
Storage size16 MB
Storage typeFLASH
Supported input voltage11 V - 57 V
Tested ambient temperature-10C to +70C tested
USB Power ResetYes
USB slot typemicroUSB type AB
Voltage MonitorYes
Wireless chip modelQCA9531
Wireless standards802.11b/g/n
Suggested price$45.00

Wireless specifications

2.4 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
1MBit/s22-96158
11MBit/s22-89158
6MBit/s20-93100
54MBit/s18-7463
MCS020-93100
MCS716-7140

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Ethernet test results

RBmAP2nDQCA9531 100M two port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)16.3197.947.1192.9173.688.9
Bridging25 bridge filter rules16.3197.947.1192.956.729.0
Routingnone (fast path)16.3197.947.1192.9160.882.3
Routing25 simple queues16.3197.947.1192.972.637.2
Routing25 ip filter rules16.3197.933.8138.434.617.7
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results