SXT Sixpack

SXT SA5 is a low cost, high speed gigabit 5GHz outdoor wireless sector access point. It has a ninety degree antenna to provide a wider
coverage than our previous SXT units. Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes.

SXT 5 is a low cost, high speed 5GHz wireless device. It has a dual chain antenna and supports 802.11n and Nv2 TDMA technology to achieve 200Mbit throughput speed! Complete with a ready to mount enclosure and built-in antenna, this is the perfect CPE!

We are now offering the SXT SA5 bundled with FIVE SXT-5 client devices -for the price of five SXT 5 units, you get a complete kit.

SXT install guide:

Product specifications

Details
Product codeRBSXTKit
CPU nominal frequency600 MHz
CPU core count1
Size of RAM64 MB
10/100 Ethernet ports0
10/100/1000 Ethernet ports1
MiniPCI slots0
MiniPCI-e slots0
Wireless chip modelAR9344-BC2A
Wireless standards802.11a/n
Number of USB ports1
Power Jack0
PoE outNo
PoE inYes
Supported input voltage8 V - 32 V
Voltage MonitorYes
CPU temperature monitorNo
PCB temperature monitorYes
Operating SystemRouterOS
Operating temperature range-30C to +80C
License level4
Antenna gain DBI13
Current MonitorNo
CPUAR9344-BC2A
SFP ports0
SFP+ ports0
USB slot typeUSB type A
Number of chains2
Serial portNone
Suggested price$445.00

Performance test results

RBSXTKitAR9342 1G 1 port test
ModeConfiguration64 byte512 byte1518 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)269.6138.0232.0950.381.0983.7
Bridging25 bridge filter rules87.644.986.0352.381.0983.7
Routingnone (fast path)226.9116.2210.0860.281.0983.7
Routing25 simple queues106.654.6103.9425.681.0983.7
Routing25 ip filter rules60.531.059.6244.156.8689.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results